Steps To Use A Vaporizer
August 24th, 2009 Posted by: admin
Step 1:Inspector Vapors water pipe has to be filled with water to cover stem and ice can be added if one wants the cool taste.
Step 2:Now you have to place a glass screen in the bottom of Inspector Vapors Custom Bowl
Step 3:Rotate the dial present on vaporizer gun to 4 and put the trigger switch on 2 so that to heat the gun.
Step 4:Consign about one-eighth of a gram of finely grinded tobacco into the vaporizer bowl.
Step 5:Now place the vaporizer gun unit on to the bowl but switch it off before placing it on the bowl as it causes the hot air to blow off tobacco before you use it.
Step 6:Now switch on the vaporizer after you have fixed gun unit and bowl together and wait for few seconds. After you see the vapors raising you should start inhaling from the pipe. In this process tobacco does not get burnt which is a key factor and differentiates it from cigarettes. When tobacco placed in it turns light brown then you are done.
Step 7:Throw the used tobacco
Step 8:Step four has to be repeated now.
Step 9:After you have stopped using the Vaporizer you should put the gun unit switch to 1 so that it can get cooled properly.
